SECTION 8 – TEMPERATURE MEASUREMENT

SECTION คำชี้แจง
- ถ้าไม่กรอกทั้งชื่อ และนามสกุลของผู้ทำข้อสอบ ระบบจะไม่ตรวจข้อสอบให้
- ส่วนนี้จะไม่มีการบันทึกผลสอบ หากต้องการบันทึกโปรดสมัครสมาชิก
- ถ้าทำข้อสอบไม่ครบ ระบบจะไม่ตรวจข้อสอบให้
- ผู้ทำข้อสอบจะมีเวลาในการทำข้อสอบเพียง 30 นาที หากเกินเวลา ระบบจะไม่ตรวจข้อสอบให้
- เกณฑ์ตัดสินผ่านการทดสอบอยู่ที่ร้อยละ 80 หรือ 8 ข้อขึ้นไป
ส่วนนี้จะไม่มีการบันทึกผลสอบ และแสดงเฉลยแบบทดสอบ หากต้องการบันทึก และรายงานการทำแบบทดสอบ โปรดสมัครสมาชิก 
ข้อสอบชุดนี้จำนวน 55 ข้อ หากต้องการเพิ่มจำนวนข้อสอบ คลิก ทำแบบทดสอบออนไลน์
หน้าเว็บนี้มาจากเว็บปลายทาง :
1. 8.16 What must be done immediately before taking temperatures using a portable electronic thermometer?
    a. Set the temperature range selector.
    b. Earth (ground) the unit, after opening the gauge hatch or vapour control valve
    c. Check the battery for low voltage
    d. Earth (ground) the unit, before opening the gauge hatch or vapour control valve
2. 8.44 When using a liquid-in-glass thermometer in a cup-case assembly to measure a product with density of 904 kg/m3 [API gravity 24.9] what is the minimum length of time the thermometer should be immersed in the liquid when the assembly is in motion during the measurement process?
    a. 5 minutes
    b. 10 minutes
    c. 20 minutes
    d. Until the readout doesn t vary by more than 0.2 °C for 30 seconds
3. 8.26 If a tank has an innage of 2,8m [9 11 ] what is the minimum number of temperatures which should be taken?
    a. One
    b. Two
    c. Three
    d. None
4. 8.09 What is the minimum acceptable accuracy for a portable electronic thermometer when it is indicating a temperature reading of 101 °C [215°F]?
    a. ± 1.0 °C [2.0°F]
    b. ± 0.5 °C [1.0°F]
    c. ± 0.3 °C [0.5°F]
    d. ± 0.75 °C [1.5°F]
5. 8.50 A 4 000m3 [25 000bbl ] capacity storage tank has a depth of product of 4.70 m [15 feet] in the tank. What is the minimum number of temperature measurements that should be obtained on this tank.
    a. One
    b. Two
    c. Three
    d. Five
6. 8.12 If a portable electronic thermometer has a range of 0 - 95 °C [32-200°F], what is the required resolution?
    a. ± 1°C [ 2°F]
    b. ± 0.2°C [ 0.4°F]
    c. ± 0.1°C [ 0.2°F]
    d. Answers a., b. and c. are all wrong
7. 8.06 On a portable electronic thermometer, what should be checked at least once per month?
    a. The junction between the cable and the probe for mechanical damage
    b. The cable insulation for cuts, breaks, or abrasion.
    c. Two or more temperatures near the ends of the range of the probe
    d. Answers a., b. and c. are all correct
8. 8.28 When using a portable electronic thermometer what is an indication of temperature stabilization?
    a. Comparison with the side temperature on the tank
    b. Comparison with a cup-case thermometer
    c. Comparison with the last temperature recorded by the terminal
    d. Readout doesn t vary by more than 0.1°C [0.2°F] for 30 seconds
9. 8.37 Which API MPMS Chapter covers temperature determination?
    a. Chapter 3
    b. Chapter 7
    c. Chapter 8
    d. Chapter 17
10. 8.08 To what precision should temperatures obtained using portable electronic thermometers be read and recorded?
    a. To the nearest 0.1 °F or °C
    b. To the nearest 0.5 °F or °C
    c. To the nearest 1.0 °F or °C
    d. To the nearest 1.5 °F or °C
ให้ตรวจสอบชื่อนามสกุลว่ากรอกครบหรือไหม่
พร้อมกับตรวจข้อสอบว่าเลือกทำครบทุกข้อหรือไม่ ไม่ครบไม่ตรวจนะครับ
แนะนำชุดข้อสอบ

1. แนวข้อสอบวิทยาศาสตร์ ประถมศึกษาปีที่ 4 ชุดที่ 1


2. แบบทดสอบหลังเรียน เรื่อง กีฬาแบดมินตัน


3. แบบทดสอบวิชาบาสเก็ตบอล


4. ข้อสอบ บรรจุครูผู้ช่วย วิชาเอก ปฐมวัย พร้อมเฉลย 50 ข้อ


นำแบบทดสอบไปติดที่เว็บของคุณ ครับ

EDUCATION RESEARCH | หน้าแรกข้อสอบ | เข้าระบบ | สมัครสมาชิก | สร้างข้อสอบ | แชร์ข้อสอบ
แนวข้อสอบบรรจุครูผู้ช่วย | TOEIC Online | IELTS Online | SAT | TOEIC | IELTS